Thermoplastic Polyimide Particle SolverPI-Particle 1600 CAS NO.32197-39-0

Benefits: 

·Make the Processing easier and greatly improve the efficiency. 

·The performance of injection molding products are molded parts better uniformity, strength is improved.

·Suitable for mass production and small precision parts. Hot Tags: SolverPI-Particle 1600,Thermoplastic Polyimide Particle

Product Name: Thermoplastic Polyimide Particle (Pure Resin for Injection Molding Grade)

Item No.: SolverPI-Particle 1600

Appearance：Amber or brown

Density：1.38g/cm²

Bibulous rate：<0.3%

The melt mass flow rate：21G/10min

Intrinsic viscosity：0.6DL/g

The tensile strength：100MPa

Elongation at break：16%

Simply supported beam without notch impact strength：260.0KJ/m²

The bending strength：143.0MPa

Bending modulus：3290.0MPa

The vicat softening temperature (50 n load, speed)：232.0°C

Glass transition temperature (nitrogen atmosphere)：254.0°C

Thermal expansion coefficient：50.0Ppm/°C

Dielectric strength：105.0KV/mm

Dielectric constant：3.2

Oxygen index：46.0%

The vertical combustion：V-0 level

So far, SOLVER Polyimide is the only reliable factory who can produce thermoplastic polyimide resin particles!

Application: Injection moulding a variety of mass production of high temperature resistant parts. (Can replace Mitsui AURUM ® PL450C).

Benefits:

·Make the Processing easier and greatly improve the efficiency.

·The performance of injection molding products are molded parts better uniformity, strength is improved.

·Suitable for mass production and small precision parts. Hot Tags: SolverPI-Particle 1600,Thermoplastic Polyimide Particle