China (Mainland)
Silibase-98601 Methylphenyl Silicon Resin CAS NO.67763-03-5
- Min.Order: 0 Metric Ton
- Payment Terms:
- Product Details
Keywords
- Methylphenyl
- Silicon Resin
Quick Details
- ProName: Silibase-98601 Methylphenyl Silicon Re...
- CasNo: 67763-03-5
- ProductionCapacity: Metric Ton/Day
- Purity: High Temperature (200±2℃) ≥30
- LimitNum: 0 Metric Ton
Superiority
Main Composition
Methylpolysilicone resin
Details
Silibase-98601 Methylphenyl Silicon Resin
1. Main Composition
Methylpolysilicone resin
2. Typical Physical Properties
|
Property |
Result |
|
|
Apperance |
Light yellow or red brown liquid, opalescence is permitted, no mechanical impurity |
|
|
Solid Content (150℃, 2h, %) |
50±1 |
|
|
Viscosity (25℃,S) No less than |
≥15 |
|
|
Drying Time (200℃, Copper Sheet, h) |
≤2 |
|
|
Mass Loss (400℃, 3h, %) |
≤5 |
|
|
Electrical Breakdown Strength (KV/mm) |
Normal(20±5℃) |
≥65 |
|
High Temperature (200±2℃) |
≥30 |
|
|
Become Damp (20±5℃, Relative Humidity 95%, after 24h) |
≥40 |
|
|
Volume Resistivity (Ω·cm) |
Normal (20±5℃) |
≥1014 |
|
High Temperature(200±2℃) |
≥1011 |
|
|
Become Damp (20±5℃, Relative Humidity 95, after 24h) |
≥1012 |
|
3. Performance and use
Silibase-98601 Methylphenyl Silicon Resin has fine high temperature resistance, electrical insulation and moisture proof property. Silibase-98601 Methylphenyl Silicon Resin is appropriate for the use of wire dipping and high temperature resistant paint for H level engine, transformer coil, transistor seal and H level glass fiber.
4. Packing & Storage & Transportation
Silibase-98601 Methylphenyl Silicon Resin should be stored in dry and clean 200kg iron drum and seal-packing under 35℃, without direct sunlight and be away from heat. Silibase-98601 Methylphenyl Silicon Resin should be transported as inflammable.
Remark:
Above text instructions, suggestions and data are from our sincerity but real environment for the use of this product are beyond the control by our Silibase Silicone Company. So before using Silibase-58205 Methyl Silicone Resin, users have the responsibility to be tested to determine whether it meets your requirements and find out the optimum dosage.